When it comes to floor stones inside the home, particularly in the kitchen, the challenge of getting the stain off the stone comes up a lot. Since the stones in the outdoor areas have less significance on how noticeable the stain is. However, we also realize that marble or crystal marble stones come to mind when it comes to making a stain on a stone; because granite is not typically utilized inside of homes and has a relatively low water absorption rate.
Table of Contents
Because the stainable elements in marble and crystal marble stones are similar, stain removal methods for both types of stones are the same. We consider the subject of this article to be marble stones because they are much more common on floors.
Despite all of its elegance and advantageous qualities, marble is susceptible to color changes and penetration because of the following:
The polishing machine is among the most basic and general ways to get rid of surface stains. The stone will become transparent again after polishing, removing a very thin layer. However, this option will cost more because it needs the technicians and polishing personnel there. While, depending on the circumstance, there can also be easier solutions.
We are going to look into the stain removal methods based on the circumstances.
The small stains on the kitchen and interior floor stones are frequently the result of droplets dropping on them. No polishing machine, milling machine, or specialized tools are required in this instance. Because 1300 or 1500-grade sandpaper can be used to remove the stain, and 2000 or 2500-grade sandpaper can be used in the stained area. In this case, pay close attention to the following.
Initially, try the following items in an area out of sight, like under a cabinet or a refrigerator. Although the stain will be less noticeable if the surface is less shiny than other stone parts, this also means that it won’t be as shiny.
It will take a lot of effort and time to remove stains that cover one square meter using the aforementioned method. But giving it a shot doesn’t hurt. The best solution is to sand it with finger sandpapers, which can be purchased for a reasonable price.
Undoubtedly, a polishing machine is needed to change the color and remove the huge stains on a significant part of the floor stone.
The short answer to this question is no. Because The stone’s surface cannot be adequately polished by milling, it is only appropriate for polishing the stone’s edges.